D3N A-3D : Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 3xD

D3N A-5D : Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 5xD

GD-DH (.500) : Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

D3N A-1.5D : Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 1.5xD

ADK : Extended Flute Cutters with ADKT/R-15... Inserts

APK-FE : Extended Flute Endmills Carrying APKT/R-10... Inserts

DR-2XD (.625-2.344" 2xD) : Indexable Insert Drills, Drilling Depth 2xD

ETS : T-Slot Endmills

E30 : 30° Chamfering Endmills

E45 : 45° Chamfering Endmills

E45X : 45° Chamfering Endmills Carrying X/Q/SOMT 06 Inserts

E60 : 60° Chamfering Endmills

E75A : 75° Endmills with AP..-1003... Inserts

E90A : Endmills Carrying APKT/APKR-10.. Inserts

E90AC : Drilling Endmills Carrying APKT/ADKT Inserts : Ø up to 1" | Ø 1.25-1.50" | Ø 2"

E90SP : Endmills Carrying Square S/XPMT Inserts

E90X : Endmills Carrying Square Q/S/XOMT Inserts

E90XC : Drilling Endmills Carrying Square S/XOMT Inserts

F45E (endmill) : 45° Endmills with SEKN/R 12... Inserts

F45ST (endmill) : 45° Screw Clamped Endmills with SEK/MT 12... Inserts

GM : Endmills for Groove Milling, with GMP and GIPI/GIFI Inserts

SPK : Extended Flute Carrying S/XPMT-10.. inserts 1.25-2.00 dia.

DCM-3D (.295-1.020") : Indexable Head Drills with One Flat Shank, Drilling Depth 3xD

DCM-5D (.295-1.020") : Indexable Head Drills with One Flat Shank, Drilling Depth 5xD

ECM : Multifunctional Endmills for Four Insert Shapes

3M E90AX : 90° Endmills Carrying 3M AXKT...Inserts

3M AXK-13 : Heavy Duty Extended Flute Endmills Carrying 3M AXKT 1304... Inserts 1.0"-1.5" dia. range.

HM90 E90A-10 : Endmills Carrying HM90 AP.. 1003... Inserts

HM90 E90AD-15 : 90° Endmills Carrying HM90 ADKT-1505... Inserts

FF EW : Fast Feed Endmills with FF WO.. Inserts

PH : High Productivity Center Cutting Plungers with PLHT 1305-PDX Inserts

PH-A : High Productivity Center Cutting Plungers with Spiral Flutes Carrying PLHT 1305-PDX Inserts

DCT (3/8-7/8 UNC/UNF) : Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes

DCM-8D (.394-1.020") : Indexable Head Drills with One Flat Shank, Drilling Depth 8xD

BCM : Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

DSM-3D (.394-.783" 3xD) : Indexable Head Drills with Coolant Holes, Drilling Depth 3xD

DSM-5D (.394-.783" 5xD) : Indexable Head Drills with Coolant Holes, Drilling Depth 5xD

HP E90AN-07 : Endmills with HELIPLUS HP ANKT 0702.. Inserts

DR-2D-N : Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD

CHAMRING : Drill Holders for Drilling and Chamfering in One Operation